|
Internal Revenue Bulletins |
| Home >
Internal Revenue Bulletins > 2006 > Bulletin No. 2006-52 > Revenue Procedure 2006-55
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NoteNote. Reclaimed fiber in any percentage is permitted, provided the requirements of this standard are met. .03 All printing of substitute Forms W-2 (Copy A) and W-3 must be in Flint red OCR dropout ink except as specified below. The following must be printed in nonreflective black ink:
.04 The vertical and horizontal spacing for all federal payment and data boxes on Forms W-2 and W-3 must meet specifications. On Form W-3 and Form W-2 (Copy A), all the perimeter rules must be 1-point (0.014-inch), while all other rules must be one-half point (0.007-inch). Vertical rules must be parallel to the left edge of the form; horizontal rules parallel to the top edge. .05 The official red-ink Form W-3 and Form W-2 (Copy A) are 7.5 inches wide. Employers filing Forms W-2 (Copy A) with the SSA on paper must also file a Form W-3. Form W-3 must be the same width (7.5 inches) as the Form W-2. One Form W-3 is printed on a standard-size, 8.5 x 11-inch page. Two official Forms W-2 (Copy A) are contained on a single 8.5 x 11-inch page (exclusive of any snap-stubs). .06 The top, left, and right margins for the Form W-2 (Copy A) and Form W-3 are .5 inches (1/2 inch). All margins must be free of printing except for the words “DO NOT STAPLE” on red-ink Form W-3. The space between the two Forms W-2 (Copy A) is 1.33 inches. .07 The identifying numbers are “22222” for Form W-2 (Copies A (and 1)) and “33333” for Form W-3. No printing should appear anywhere near the identifying numbers. For both Form W-2 (Copy A) and Form W-3, the combination width of box a (Control number) and the box containing the identifying number must be 2.5 inches. NoteNote. The identifying number must be printed in nonreflective black ink in OCR-A font of 10 characters per inch. .08 The depth of the individual scannable image on a page must be the same as that on the official IRS forms. The depth from the top line to the bottom line of an individual Form W-2 (Copy A) must be 4.17 inches and the depth from the top line to the bottom line of Form W-3 must be 4.67 inches. (See Exhibits A and B.) .09 Continuous-pinfed Forms W-2 (Copy A) must be separated into 11-inch deep pages. The pinfed strips must be removed when Forms W-2 (Copy A) are filed with the SSA. The two Forms W-2 (Copy A) on the 11-inch page must not be separated (only the pages are to be separated (burst)). The words “Do Not Cut, Fold, or Staple Forms on This Page” must be printed twice between the two Forms W-2 (Copy A) in Flint red OCR dropout ink. Perforations are required on all other copies (Copies 1, B, C, 2, and D) to enable the separation of individual forms. .10 Box 12 of Form W-2 (Copy A) contains four entry boxes - 12a, 12b, 12c, and 12d. Do not make more than one entry per box. Enter your first code in box 12a (for example, enter Code D in box 12a, not 12d, if it is your first entry). If more than four items need to be reported in box 12, use a second Form W-2 to report the additional items (see “Multiple forms” in the 2006 Instructions for Forms W-2 and W-3). Do not report the same federal tax data to the SSA on more than one Form W-2 (Copy A). However, repeat the identifying information (employee’s name, address, and SSN; employer’s name, address, and EIN) on each additional form. .11 The checkboxes in box 13 of Form W-2 (Copy A) must be .14 inches each; the space before the first checkbox is .20 inches; the spacing on each remaining side of the 3 checkboxes is .36 inches (see Exhibit A). The checkboxes in box b of Form W-3 must also be .14 inches (see Exhibit B for other dimensions in box b). NoteNote. More than 50% of an applicable checkbox must be covered by an “X.” .12 All substitute Forms W-2 (Copy A) and W-3 in the red-ink format must have the tax year, form number, and form title printed on the bottom face of each form using type identical to that of the official IRS form. The red-ink substitute Form W-2 (Copy A) and Form W-3 must have the form producer’s EIN entered directly to the left of “Department of the Treasury,” in red. .13 The words “For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D.” must be printed in Flint red OCR dropout ink in the same location as on the official Form W-2 (Copy A). The words “For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D of Form W-2.” must be printed at the bottom of the page of Form W-3 in black ink. .14 The Office of Management and Budget (OMB) Number must be printed on substitute Forms W-3 and W-2 (on each ply) in the same location as on the official IRS forms. .15 All substitute Forms W-3 must include the instructions that are printed on the same sheet below the official IRS form. .16 The back of substitute Form W-2 (Copy A) and Form W-3 must be free of all printing. .17 All copies must be clearly legible. Hot wax and cold carbon spots are not permitted for Form W-2 (Copy A). Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility. .18 Chemical transfer paper is permitted for Form W-2 (Copy A) only if the following standards are met:
.19 The Government Printing Office (GPO) symbol and the Catalog Number (Cat. No.) must be deleted from substitute Form W-2 (Copy A) and Form W-3. .01 The SSA-approved, laser-printed, black-and-white Forms W-2 (Copy A) and W-3 are referred to as laser-printed. Specifications for the laser-printed black-and-white Forms W-2 (Copy A) and W-3 are similar to the red-ink forms (Part B, Section 1A) except for the items that follow (see Exhibits E and F). Exhibits are samples only and must not be downloaded to meet tax obligations.
.02 You must submit samples of your laser-printed substitute forms to the SSA. Only laser-printed, black-and-white substitute Forms W-2 (Copy A) and W-3 for tax year 2006 will be accepted for approval by the SSA. Questions regarding other forms (that is, red-ink Forms W-2c, W-3c, 1099 series, 1096, etc.) must be directed to the IRS. .03 You will be required to send one set of blank and one set of dummy-data, laser-printed substitute Forms W-2 (Copy A) and W-3 for approval. Sample data entries should be filled in to the maximum length for each box entry, preferably using numeric data or alpha data, depending upon the type required to be entered. Include in your submission the name, telephone number, fax number, and email address of a contact person who can answer questions regarding your sample forms. .04 To receive approval, you may first contact the SSA at laser.forms@ssa.gov to obtain a template and further instructions in PDF or Excel format. You may also send your 2006 sample, laser-printed substitute forms to: Social Security Administration Data Operations Center Attn: Laser Forms Approval, Room 235 1150 E. Mountain Drive Wilkes-Barre PA 18702-7997 Send your sample forms via private mail carrier or certified mail in order to verify their receipt. You can expect approval (or disapproval) by the SSA within 30 days of receipt of your sample forms. .05 The 4-digit vendor code preceded by four zeros and a slash (0000/) must be preprinted on the sample, laser-printed substitute forms. Forms not containing a vendor code will be rejected and will not be submitted for testing or approval. If you do not have a vendor code, you may contact the National Association of Computerized Tax Processors via email at president@nactp.org. .06 If you use forms produced by a vendor and have questions concerning approval, do not send the forms to the SSA for approval. Instead, you may contact the software vendor to obtain a copy of SSA’s dated approval notice supplied to that vendor. NoteNote. Printers are cautioned that the rules in Part B, Section 2 (this section), apply only to employee copies of Form W-2 (Copies B, C, and 2). Paper filers who send Forms W-2 (Copy A) to the SSA must follow the requirements in Part B, Sections 1A and/or 1B above. .01 All employers (including those who file electronically) must furnish employees with at least two copies of Form W-2 (three or more for employees required to file a state, city, or local income tax return). The following rules are guidelines for preparing employee copies. The dimensions of these copies (Copies B, C, and 2), but not Copy A, may differ from the dimensions of the official IRS form to allow space for reporting additional information, including additional entries such as withholding for health insurance, union dues, bonds, or charity in box 14. The limitation of a maximum of four items in box 12 of Form W-2 applies only to Copy A, which is filed with the SSA. NoteNote. Payee statements (Copies B, C, and 2 of Form W-2) may now be furnished electronically, if employees give their consent (as described in Treasury Regulations Section 31.6051-1(j)). See also Publication 15-A, Employer’s Supplemental Tax Guide. .02 The minimum dimensions for employee copies only (not Copy A) of Form W-2 should be 2.67 inches deep by 4.25 inches wide. The maximum dimensions should be no more than 6.5 inches deep by no more than 8.5 inches wide. NoteNote. The maximum and minimum size specifications are for tax year 2006 only and may change in future years. .03 Either horizontal or vertical format is permitted (see Exhibit D). .04 The paper for all copies must be white and printed in black ink. The substitute Copy B, which employees are instructed to attach to their federal income tax returns, should be at least 9-pound paper (basis 17 x 22-500). Other copies furnished to employees should also be at least 9-pound paper (basis 17 x 22-500). .05 Employee copies of Form W-2 (Copies B, C, and 2), including those that are printed on a single sheet of paper, must be easily separated. Providing perforations between the individual copies satisfies this requirement, but using scissors to separate Copies B, C, and 2 does not. NoteNote. The perforation requirement in this section does not apply to printouts of copies of Forms W-2 that are furnished electronically to employees (as described in Treasury Regulations Section 31.6051-1(j)). However, these employees should be cautioned to carefully separate the copies of Form W-2. See Publication 15-A, Employer’s Supplemental Tax Guide, for information on electronically furnishing Forms W-2 to employees. .06 Interleaved carbon and chemical transfer paper employee copies must be clearly legible. Hot wax and cold-carbon spots are not permitted for employee copies. All copies must be able to be photocopied. Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility. .07 The electronic tax logo on the IRS official employee copies is not required on any of the substitute form copies. To avoid confusion and questions by employees, employers are encouraged to delete the identifying number (“22222”) and the word “Void” and its associated checkbox from the employee copies of Form W-2. .08 All substitute employee copies must contain boxes, box numbers, and box titles that match the official IRS Form W-2. Boxes that do not apply can be deleted. However, certain core boxes must be included. The placement, numbering, and size of this information is specified as follows:
Identifying items must be present on the form and be in boxes similar to those on the official IRS form. However, they may be placed in any location other than the top or upper right. You do not need to use the lettering system (b-f) used on the official IRS form. The employer identification number (EIN) may be included with the employer’s name and address and not in a separate box. NoteNote. Box a (“Control number”) is not required. .09 All copies of Form W-2 furnished to employees must clearly show the form number, the form title, and the tax year prominently displayed together in one area of the form. The title of Form W-2 is “Wage and Tax Statement.” It is recommended (but not required) that this be located on the bottom left of substitute Forms W-2. The reference to the “Department of the Treasury — Internal Revenue Service” must be on all copies of substitute Forms W-2 furnished to employees. It is recommended (but not required) that this be located on the bottom right of Form W-2. .10 If the substitute employee copies are labeled, the forms must contain the applicable description:
It is recommended (but not required) that these be located on the lower left of Form W-2. If the substitute employee copies are not labeled as to the disposition of the copies, then written notification using similar wording must be provided to each employee. .11 The tax year (2006) must be clearly printed on all copies of substitute Form W-2. It is recommended (but not required) that this information be in the middle at the bottom of the Form W-2. The use of 24-pt. OCR-A font is recommended (but not required). .12 Boxes 1, 2, and 9 (if applicable) on Copy B must be outlined in bold 2-point rule or highlighted in some manner to distinguish them. If “Allocated tips” are being reported, it is recommended (but not required) that box 8 also be outlined. If reported, “Social security tips” (box 7) must be shown separately from “Social security wages” (box 3). NoteNote. Boxes 8 and 9 may be omitted if not applicable. .13 If employers are required to withhold and report state or local income tax, the applicable boxes are also considered core information and must be placed at the bottom of the form. State information is included in:
Local information is included in:
.14 Boxes 7 through 14 may be omitted from substitute employee copies unless the employer must report any of that information to the employee. For example, if an employee did not have “Social security tips” (box 7), the form could be printed without that box. But if an employer provided dependent care benefits, the amount must be reported separately, shown in box 10, and labeled “Dependent care benefits.” .15 Employers may enter more than four codes in box 12 of substitute Copies B, C, and 2 (and 1 and D) of Form W-2, but each entry must use Codes A-BB (see the 2006 Instructions for Forms W-2 and W-3). .16 If an employer has employees in any of the three categories in box 13, all checkbox headings must be shown and the proper checkmark made, when applicable. .17 Employers may use box 14 for any other information that they wish to give to their employees. Each item must be labeled. (See the instructions for box 14 in the 2006 Instructions for Forms W-2 and W-3.) .18 The front of Copy C of a substitute Form W-2 must contain the note “This information is being furnished to the Internal Revenue Service. If you are required to file a tax return, a negligence penalty or other sanction may be imposed on you if this income is taxable and you fail to report it.” .19 Instructions similar to those contained on the back of Copies B, C, and 2 of the official IRS Form W-2 must be provided to each employee. An employer may modify or delete instructions that do not apply to its employees. (For example, remove Railroad Retirement Tier 1 and Tier 2 compensation information for nonrailroad employees or information about dependent care benefits that the employer does not provide.) .20 Employers must notify their employees who have no income tax withheld that they may be able to claim a tax refund because of the earned income credit (EIC). They will meet this notification requirement if they furnish a substitute Form W-2 with the EIC notice on the back of Copy B, IRS Notice 797, Possible Federal Tax Refund Due to the Earned Income Credit (EIC), or on their own statement containing the same wording. They may also change the font on Copies B, C, and 2 so that the EIC notification and Form W-2 instructions fit differently. For more information about notification requirements, see Notice 1015, Have You Told Your Employees About the Earned Income Credit (EIC)? NoteNote. An employer does not have to notify any employee who claimed exemption from withholding on Form W-4, Employee’s Withholding Allowance Certificate, for the calendar year. .01 If electronic media is not used for filing with the SSA, the substitute copies of Forms W-2 (either red-ink or laser-printed) should be assembled in the same order as the official IRS Forms W-2. Copy A should be first, followed sequentially by perforated sets (Copies 1, B, C, 2, and D). .02 The substitute form to be filed by the employer with the SSA must carry the designation “Copy A.” NoteNote. Electronic filers do not submit either red-ink or laser-printed paper Form W-2 (Copy A) or Form W-3 to the SSA. .03 Substitute forms (red-ink or laser-printed) do not require a copy to be retained by employers (Copy D of Form W-2). However, employers must be prepared to verify or duplicate the information if it is requested by the IRS or the SSA. Paper filers who do not keep a Form W-2 (Copy D) should be able to generate a facsimile of Form W-2 (Copy A) in case of loss. .04 Except for copies in the official assembly, no additional copies that may be prepared by employers should be placed ahead of Form W-2 (Copy C) “For EMPLOYEE’S RECORDS.” .05 You must provide instructions similar to those contained on the back of Copies B, C, and 2 of the official IRS Form W-2 to each employee. You may print them on the back of the substitute Copies B, C, and 2 or provide them to employees on a separate statement. You do not need to use the back of Copy 2. If you do not use Copy 2, you may include all the information, which is on the back of the official Copies B, C, and 2, on the back of your substitute Copies B and C only. As an example, you may use the “Note” on the back of the official Copy C as the dividing point between the text for your substitute Copies B and C. Do not print these instructions on the back of Copy 1. Any Forms W-2 (Copy A) and W-3 that are filed with the SSA must have no printing on the reverse side. .01 Only originals of Form W-2 (Copy A) and Form W-3 may be filed with the SSA. Carbon copies and photocopies are unacceptable. .02 Employers should type or machine-print data entries on the non-laser-generated forms whenever possible. Ensure good quality by using a high-quality type face, inserting data in the middle of blocks that are well separated from other printing and guidelines, and taking any other measures that will guarantee clear, sharp images. Black ink must be used with no script type, inverted font, italics or dual-case alpha characters. NoteNote. 12-point Courier font is preferred by the SSA. .03 Form W-2 (Copy A) requires decimal entries for wage data. Dollar signs should not be printed with money amounts on the Forms W-2 (Copy A) and W-3. .04 The employer must provide a machine-scannable Form W-2 (Copy A). The employer must also provide employee copies (Copies B, C, and 2) that are legible and able to be photocopied (by the employee). Do not print any data in the top margin of the payee copies of the forms. .05 Any printing in box a (Control number) on Forms W-2 or W-3 may not touch any vertical or horizontal lines and should be centered in the box. .06 The filer’s employer identification number (EIN) must be entered in box b of Form W-2 and box e of Form W-3. The EIN entered on Form(s) W-2 (box b) and Form W-3 (box e) must be the same as on Forms 941, 943, 944, CT-1, Schedule H (Form 1040), or any other corresponding forms filed with the IRS. Be sure to use EIN format (00-0000000) rather than SSN format (000-00-0000). .07 The employer’s name, address, and EIN may be preprinted. .08 If available, employers should use the official IRS-preprinted Form W-3 that they received with Publication 393 or Publication 2184 when filing red-ink Forms W-2 (Copy A) with the SSA. .01 The Paperwork Reduction Act (the Act) of 1995 (Public Law 104-13) requires the following:
.02 This information must be provided to any users of official or substitute IRS forms or instructions. .03 The OMB requirements for substitute IRS Form W-2 (Copy A) and Form W-3 are the following.
.04 Any substitute Form W-2 (Copy A only) must state “For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D.” Any substitute Form W-3 must state “For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D of Form W-2.” If no instructions are provided to users of your forms, you must furnish them with the exact text of the Privacy Act and Paperwork Reduction Act Notice. .01 You can obtain official IRS forms and information copies of federal tax materials at local IRS offices or by calling the IRS Distribution Center at 1-800-829-3676. Other ways to get federal tax material include the following.
Only contact the IRS, not the SSA, for IRS forms. NoteNote. Many IRS forms are provided on the IRS website and on the Federal Tax Forms CD-ROM. But copies of Form W-2 (Copy A) and Form W-3 cannot be used for filing with the IRS or SSA when obtained by these methods because the forms do not meet the specific printing specifications as described in this publication. Copies of Forms W-2 and W-3 obtained from these sources are for information purposes only. .02 The IRS also offers an alternative to downloading electronic files and provides current and prior-year access to tax forms and instructions through its Federal Tax Forms CD-ROM. The CD will be available for the upcoming filing season. Order Publication 1796, IRS Federal Tax Products CD-ROM, by using the IRS website at www.irs.gov/cdorders or by calling 1-877-CDFORMS (1-877-233-6767). .01 Revenue Procedure 2005-65, 2005-38 I.R.B. 564, dated September 19, 2005 (reprinted as Publication 1141, Revised 10-2005), is superseded. Internal Revenue Bulletin 2006-52 SEARCH: You can either: Search all IRS Bulletin Documents issued since January 1996, or Search the entire site. For a more focused search, put your search word(s) in quotes. 2006 Document Types | 2006 Weekly IRB Index © 2006, UncleFed.com
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
